[amayausers] Re: networking

It should work without any real problem.  I'd try it first before paying
someone else.  I assume your router is attached to a hub?  If not I'd put a
hub in and go through there.

Kelly

For Heaven's Sake Embroidery & Design
7790 Jefferson Road
Brooklyn, MI 49230
517-592-4272
517-592-3450 - FAX
www.frontiernet.net/~for_heavens_sake


-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Dragonstitch
Sent: Saturday, March 20, 2004 4:43 PM
To: amayausers@xxxxxxxxxxxxxxxx
Subject: [amayausers] Re: networking


I'm not worried about protecting my computers.... All my internet is through
the router.  I am only trying to connect my amaya without having another
computer dedicated to it, as right now my amaya is in a different room from
my computer and I didn't want to run a ton of ethernet cabling to it to
connect it to the OS.  The rooms are already setup with cable to the router.
I was just wondering how to get the computer to recognize the amaya.

Loree

----- Original Message -----
From: "Jack Fuller" <jack@xxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Saturday, March 20, 2004 9:00 AM
Subject: RE: [amayausers] networking


> Loree
> Why would you not want to protect all your computers with the router? Very
> good protection can be had running everything out of the router. Then, if
> you need a hub, you can connect everything else safely. A router will
> provide much better safety with it's hardware firewall than any software
> firewalls like you find in XP or Norton etc.
> Jack



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: