[amayausers] Re: my machine does the weirdest things-and a message to Hugo

I would also add,,,,,
Make sure to always filter out short stitches on designs....
John
A Golden Stitch
----- Original Message -----
From: "frank davis" <fadavis@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Tuesday, February 11, 2003 1:12 PM
Subject: Re: [amayausers] my machine does the weirdest things-and a message
to Hugo


> Connie,
> AMPASS05 is the test design on the software.  It's about 54,000 stitches.
> It should be run on two pieces of cut away, material thickness of three,
> speed of 1200 stitches per minute, and should have three or less breaks.
> Don't alter the design in any way.  It will take a 44cm x 30cm hoop.  If
> that runs good, try what ever you want.  But it's a good idea to thin out
> stock designs by 10-20% first to try to decrease the thread breaks.
> Frank
> Force Ten
> ----- Original Message -----
> From: <captaingold@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, February 11, 2003 5:46 PM
> Subject: Re: [amayausers] my machine does the weirdest things-and a
message
> to Hugo
>
>
> > Vicki,
> >
> > I'm so glad they've decided to replace your machine. To be honest, it
had
> me a little frightened. Good luck with your new one.
> >
> > I should have my new machine up and running by this weekend (as soon as
my
> PC arrives), but until then it's sitting in the other room teasing me as I
> read through the manual.
> >
> > For everyone on the list - what would you recommend as a good starter
> project?
> >
> > Thanks,
> > Connie
> > Wyvern Productions
> >
> > -------Original Message-------
> > From: Vfs762@xxxxxxx
> > Sent: 02/11/03 11:33 AM
> > To: Amayausers@xxxxxxxxxxxxxxxx
> > Subject: [amayausers] my machine does the weirdest things-and a message
to
> Hugo
> >
> > >
> > > Hugo,
> > I stayed home from work today, just to run the ampass design as you
> > suggested.  I won't bother you with my log, but here is a summary of
what
> > happened.  I got 4237 stitches into the design and had 8 real breaks and
1
> >
> > false.  But the really weird thing that happened was at stitch 3500 it
was
> >
> > running a fill stitch and I decided to up the speed to 1000 (from 850)
> > after
> > I did this I walked about 15 feet away and then heard the machine acting
> > funny, I turned around and the machine was just sliding back and forth
> > (needle case/needle bar) like it was trying to change colors, it
wouldn't
> > stop so I pushed the emergency stop.  the error message on the computer
> > said
> > sewing speed change unsuccessful.  Got it back on track, immediately had
a
> >
> > thread break, as I was threading the machine the phone rang.  It was
Sally
> >
> > from Melco calling to verify my address for my NEW machine!!! Yippee,
> > needlesstosay I stopped running that design. ( I was headed for a long
> > afternoon of rethreading and I wasn't really in the mood :)
> > So guys thank you for your patience with me and my machine, lets all
hope
> > that things are better next week.
> > Vicki
> > >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: