[amayausers] Re: machine & software problems

Hi  Steve,
As far as I know all Amayas have helix-coils in the carriage, and they are a
problem from time to time.  I have replaced two carriages due to the
problem.   The coils are better than just tapping the aluminum.  Constant
use on aluminum threads won't last long.  Several people have told me that
they have been able to put new coils in.  I believe it takes a 4mm coil but
I'm not sure.  As far as your software problem, I can't help.  I have always
had trouble from time to time loading RSA files, regardless of the version.
Frank
Force Ten
----- Original Message -----
From: "Steve Wurtz" <sbw@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Saturday, November 15, 2003 10:42 AM
Subject: [amayausers] machine & software problems


> I have recently developed a couple of problems with our Amaya. First with
> the OS I have been getting an unable to finish loading rsa files when
> turning on the machine. Also a loading design denied message. Usually, I
> end up having to reboot the computer to get everything to work right.
Never
> had this problem until the last software upgrade. The second problem is on
> the machine. One of the thumb screws that hold the hoop arms twisted off
> and is stuck in the threaded hole. After looking closely at the problem,
it
> appears that a heli-coil was used in that hole in place of a tapped
thread.
> It looks like heli-coils were used in a couple other holes as well. Ayone
> else notice this.
> Any advise or help would be appreciated.
>
> Steve
> Northsports
> Kalkaska, MI
> 231-258-1445
> sbw@xxxxxxxxxxxxx
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: