[amayausers.com] Re: jacket back hoop
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 26 Sep 2010 02:44:56 UT
This message was posted by twinsmom2 on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1357.html
I am using a jacket back hoop to sew out a very large biker club patch....heavy
twill with heat adhered heavy mesh backing. It pulls a little in the hoop,
guess the weight is too much for that large hoop. Just wondering if the two
brass screw holes in the hoop front and back are for some sort of clamp? I
could surely use them if that is the case. Tried several "home-made" clamping
ideas, but they always get knocked off.
Does anyone know the answer to my question?
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
