[amayausers] Re: hoop arm screws snapping

Most likely the biggest cause was the same as my problem.
Overtightening. From my experience I am glad they are the weak point in
the system. If that were not the case we would strip the threads out of
the holes and the repair would be harder. It has been a while since I
installed any helicoils but I hope I can when the holes get stripped.

ice_man21@xxxxxxxxxxxxx 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Roland R. Irish
III
Sent: Saturday, September 24, 2005 8:27 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: hoop arm screws snapping

Anyone else breaking off the brass 'finger' screws on the hoop arms-the
ones
 

-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.11.6/111 - Release Date:
9/23/2005

Other related posts: