[amayausers.com] Re: hook timing off.

This message was posted by cjk on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/341.html

I am frustrated!  Yesterday I was having a lot of problems with birdnests under 
the hoop and thread breaking so other half decided he needed to take the rotary 
hook guides loose and take it all apart to clean it out.  After that the breaks 
were even worse.  Would sew maybe 3 stitches and break - lots of nesting etc.  
We discovered he had neglected to put the hook guard back in the gap at the top 
of the bobbin case.  Now the rotary hook timing is off and even with using the 
manual on the cd we worked for 3 hours without being able to get the hook 
timing lined back up.  We would get the z axis to 200 and when we do the rotary 
hook is way off to the right with the needle up.  Its lined up right with the 
hook down.  Any suggestions?  Ck

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: