[amayausers] Re: help with Visors

I agree.  If you can't get the logo down close enough to the bill then 
remove the hoop limits and carefully trace.  On visors if you get to close 
to the bill then the bill will rub more on the back side of the needle plate 
cause distortion and probably thread and needle breaks but you should be 
able to get pretty close to the bill.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message ----- 
From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, May 30, 2007 1:57 PM
Subject: [amayausers] Re: help with Visors


> So I'm not sure if I understand,
> when you load the design, it comes in centered,
> but the trace let's it fall outside of the visors edge?
> is it proportionately high above the bill of the visor?
>
> In my mind I would just hold down the hoop button and the
> directional arrows until the trace came down to where I needed
> it regardless of what it shows me in the hoop limits.
> and if I need to I'd shut off hoop limits. but you would want
> to trace each hat to verify placement.
>
> but maybe I'm misunderstanding the question.
>
> Ron Vinyard
> Body Cover / Magic Stitches
>
> 1-888-435-0176
> 541-471-1504 Fax 541-471-0427
>
> 420 SW H Street, Grants Pass, OR 97526-2532
>
> info@xxxxxxxxxxxxxxxxxxx
> www.bodycoverdesign.com
>
>
> ----- Original Message ----- 
> From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Wednesday, May 30, 2007 11:23 AM
> Subject: [amayausers] help with Visors
>
>
>> All,
>>
>> I need some help today.  I am trying to do some visors and when I hoop it 
>> on
>> a WACF and put it in, and trace the design, the trace is outside of the
>> visor.  Is there any adjustment I need to make to the cap driver to make
>> this work.
>>
>> Is there an other way? How do I do it differently.  The lettering is only 
>> 1"
>> in height.  So, it is not too big.  I have hooped the best I could.
>>
>> I can send pictures if someone would like to see what I am talking about
>>
>> I also have the frame with the green handle.  Does anyone use that.  I 
>> think
>> I bought it with the flexfit and wondering if someone could help me with
>> this.
>>
>> Thanks,
>>
>>
>> Best Regards,
>> Veena Viswanath.
>>
>> Iris Embroidery
>> 510-226-6171
>> www.irisembroidery.com
>> Embroidery, Screen-printing or Promotions!!
>>
>> ===========================================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>>
>>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> =========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: