[amayausers] Re: help with Visors
- From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 30 May 2007 13:57:38 -0700
So I'm not sure if I understand,
when you load the design, it comes in centered,
but the trace let's it fall outside of the visors edge?
is it proportionately high above the bill of the visor?
In my mind I would just hold down the hoop button and the
directional arrows until the trace came down to where I needed
it regardless of what it shows me in the hoop limits.
and if I need to I'd shut off hoop limits. but you would want
to trace each hat to verify placement.
but maybe I'm misunderstanding the question.
Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504 Fax 541-471-0427
420 SW H Street, Grants Pass, OR 97526-2532
info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
----- Original Message -----
From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, May 30, 2007 11:23 AM
Subject: [amayausers] help with Visors
> All,
>
> I need some help today. I am trying to do some visors and when I hoop it on
> a WACF and put it in, and trace the design, the trace is outside of the
> visor. Is there any adjustment I need to make to the cap driver to make
> this work.
>
> Is there an other way? How do I do it differently. The lettering is only 1"
> in height. So, it is not too big. I have hooped the best I could.
>
> I can send pictures if someone would like to see what I am talking about
>
> I also have the frame with the green handle. Does anyone use that. I think
> I bought it with the flexfit and wondering if someone could help me with
> this.
>
> Thanks,
>
>
> Best Regards,
> Veena Viswanath.
>
> Iris Embroidery
> 510-226-6171
> www.irisembroidery.com
> Embroidery, Screen-printing or Promotions!!
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
- Follow-Ups:
- [amayausers] Re: help with Visors-- CCF frame.
- From: Veena Viswanath
- [amayausers] Re: help with Visors
- From: Linen Barn
- References:
- [amayausers] Re: Conventional Cap Frame
- From: webmaster
- [amayausers] help with Visors
- From: Veena Viswanath
Other related posts:
- » [amayausers] help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- » [amayausers] Re: help with Visors
- [amayausers] Re: help with Visors-- CCF frame.
- From: Veena Viswanath
- [amayausers] Re: help with Visors
- From: Linen Barn
- [amayausers] Re: Conventional Cap Frame
- From: webmaster
- [amayausers] help with Visors
- From: Veena Viswanath