[amayausers] Re: help with Visors

I used to design and sew clothes (mostly Indian (not American Indian))
clothes just for a hobby during my engineering days and my rule of thumb is
like that of a carpenter; check twice ; cut once.  If I made a mistake and
cut the garment wrong, I would not be able to fix it back and therefore am
pretty careful about it.

I still need to bring the lettering down and don't know how to do that.  The
bottom of the lettering is about 0.75 from the brim of the visor.  I want to
know how to reduce this.

Any ideas.  

Best Regards,
Veena Viswanath.
 
Iris Embroidery
510-226-6171
www.irisembroidery.com
Embroidery, Screen-printing or Promotions!!
 

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of John Yaglenski
Sent: Wednesday, May 30, 2007 1:39 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: help with Visors

Apparently Ron and I both have selected the wrong hoop in the past :)

Heh.

----------------------------------------

From: "John Yaglenski" <john@xxxxxxxxxxxxx>
Sent: Wednesday, May 30, 2007 4:33 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: help with Visors 

Veena:

I am sure you are already doing this - but check to make sure you have the
right hoop selected. Even change it to the CCF and then back to WACF again.

On the CCF / Green Cap frames, we use them for visors all the time with no
problems. If you want, you can send me the design and I will try to load it
up in our CCF and see what happens. :)

John

----------------------------------------

From: "Veena Viswanath" 
Sent: Wednesday, May 30, 2007 4:19 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: help with Visors 

I tried that, but it was not of much use. If I set something up on Design
shop and take it amaya, it does not seem to take the hoop settings. Like
for example, I moved the design down in DS and the design showed up centered
on OS. 

There is quite a bit of room on the visor, but for some reason, it seems to
show out of bounds when I trace it. 

Any other suggestions?

Best Regards,
Veena Viswanath.

Iris Embroidery
510-226-6171
www.irisembroidery.com
Embroidery, Screen-printing or Promotions!!

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
Sent: Wednesday, May 30, 2007 11:59 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: help with Visors

Veena,
I have found that I have to move the design off-center (down) in DS prior 
to bringing it to OS. If the design is centered I cannot get enough room to 
get it on the visor before I exceed the hoop.

Herb
----- Original Message ----- 
From: "Veena Viswanath" 
To: 
Sent: Wednesday, May 30, 2007 11:23 AM
Subject: [amayausers] help with Visors

> All,
>
> I need some help today. I am trying to do some visors and when I hoop it 
> on
> a WACF and put it in, and trace the design, the trace is outside of the
> visor. Is there any adjustment I need to make to the cap driver to make
> this work.
>
> Is there an other way? How do I do it differently. The lettering is only 
> 1"
> in height. So, it is not too big. I have hooped the best I could.
>
> I can send pictures if someone would like to see what I am talking about
>
> I also have the frame with the green handle. Does anyone use that. I 
> think
> I bought it with the flexfit and wondering if someone could help me with
> this.
>
> Thanks,
>
>
> Best Regards,
> Veena Viswanath.
>
> Iris Embroidery
> 510-226-6171
> www.irisembroidery.com
> Embroidery, Screen-printing or Promotions!!
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.8.3/824 - Release Date: 5/29/2007 
> 1:01 PM
>
> 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 


=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: