[amayausers] Re: help with Visors

Make sure you don't have the hat hoop set for 
the WAD frame instead of the WACF frame.

That can make a difference.

Ron Vinyard
Body Cover / Magic Stitches

1-888-435-0176
541-471-1504 Fax 541-471-0427

420 SW H Street, Grants Pass, OR 97526-2532

info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com

----- Original Message ----- 
From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, May 30, 2007 1:15 PM
Subject: [amayausers] Re: help with Visors


>I tried that, but it was not of much use.  If I set something up on Design
> shop and take it amaya, it does not seem to take the hoop settings.  Like
> for example, I moved the design down in DS and the design showed up centered
> on OS.  
> 
> There is quite a bit of room on the visor, but for some reason, it seems to
> show out of bounds when I trace it. 
> 
> Any other suggestions?
> 
> 
> Best Regards,
> Veena Viswanath.
> 
> Iris Embroidery
> 510-226-6171
> www.irisembroidery.com
> Embroidery, Screen-printing or Promotions!!
> 
> 
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of HK Acree
> Sent: Wednesday, May 30, 2007 11:59 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] Re: help with Visors
> 
> Veena,
> I have found that I have to move the design off-center (down)  in DS prior 
> to bringing it to OS. If the design is centered I cannot get enough room to 
> get it on the visor before I exceed the hoop.
> 
> Herb
> ----- Original Message ----- 
> From: "Veena Viswanath" <irisembroidery@xxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Wednesday, May 30, 2007 11:23 AM
> Subject: [amayausers] help with Visors
> 
> 
>> All,
>>
>> I need some help today.  I am trying to do some visors and when I hoop it 
>> on
>> a WACF and put it in, and trace the design, the trace is outside of the
>> visor.  Is there any adjustment I need to make to the cap driver to make
>> this work.
>>
>> Is there an other way? How do I do it differently.  The lettering is only 
>> 1"
>> in height.  So, it is not too big.  I have hooped the best I could.
>>
>> I can send pictures if someone would like to see what I am talking about
>>
>> I also have the frame with the green handle.  Does anyone use that.  I 
>> think
>> I bought it with the flexfit and wondering if someone could help me with
>> this.
>>
>> Thanks,
>>
>>
>> Best Regards,
>> Veena Viswanath.
>>
>> Iris Embroidery
>> 510-226-6171
>> www.irisembroidery.com
>> Embroidery, Screen-printing or Promotions!!
>>
>> ===========================================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.472 / Virus Database: 269.8.3/824 - Release Date: 5/29/2007 
>> 1:01 PM
>>
>> 
> 
> =========================================================== 
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
> 
> =========================================================== 
> 
> =========================================================== 
> 
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
> 
> =========================================================== 
> 
>
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: