I believe Hanes makes the PC61 for SanMar....Good shirt. Mike Image Embroidery wrote: >Roland, > >I wondered about the SanMar tee. >I use the Gildan 2000 most of time and now that there is a Ladies Cut Tee, I >find myself using that one the majority of the time. >I think they are both 6.1 oz. > >LuAnn >----- Original Message ----- >From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx> >To: <amayausers@xxxxxxxxxxxxx> >Sent: Tuesday, April 11, 2006 11:43 AM >Subject: [amayausers] Re: favorite t-shirt? > > > > >>gildan has a heavyweight that is good, but Sanmar has the Port >>Authority brand (their house brand label) and those teeshirts are a >>little heavier, little longer, better shirt! >>Roland >> >>Sunrise Graphics >>116 Main St >>Claremont, NH 03743 >>603-543-1324 >>fax 603-543-9902 >>www.sunrisegraphics.org >>signman@xxxxxxxxxxxxxxxxxxx >> >> >>On Apr 11, 2006, at 10:01 AM, Shuffletown Embroidery wrote: >> >> >> >>>Good morning everyone. >>>What do you think is the best t-shirt for left-chest embroidery? I >>>believe >>>someone once told me there was a Gildan that he thought was >>>superior, but I >>>don't remember the style number. I'm doing white tees, and a limited >>>quantity. >>>Any tips for stabilizers would be welcome, too. I have tested my >>>design with >>>two layers of no-show mesh and a tear/wash-away topper hooped with the >>>shirt. >>>TIA, >>>Mary >>> >>>Mary Buckle >>>Shuffletown Embroidery >>>Charlotte, NC >>>704-398-1273 >>> >>>-----Original Message----- >>>From: amayausers-bounce@xxxxxxxxxxxxx >>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Garber >>>Sent: Monday, April 10, 2006 9:51 PM >>>To: amayausers list >>>Subject: [amayausers] XT MT Confusion >>> >>>Hello, >>> >>>I just received delivery of my first XT. I'm experiencing Material >>>Thickness differences from the old Amayas. I'm not using the auto >>>material thickness yet. >>>Hats sewn at 13 seem to want to sew at 10 or 11. I've set the bobbin >>>tension a little tighter and I think the result is same. I don't >>>recall >>>anyone else running into this. >>> >>>Mike >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >> >> > > > > > >