[amayausers] Re: favorite t-shirt?
- From: "Shuffletown Embroidery" <shuffemb@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 11 Apr 2006 16:10:05 -0400
Thanks, Mike. I just noticed how many responses are in this email. I've only
seen two so far!
Mary Buckle
Shuffletown Embroidery
Charlotte, NC
704-398-1273
-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Garber
Sent: Tuesday, April 11, 2006 1:04 PM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] Re: favorite t-shirt?
I believe Hanes makes the PC61 for SanMar....Good shirt.
Mike
Image Embroidery wrote:
>Roland,
>
>I wondered about the SanMar tee.
>I use the Gildan 2000 most of time and now that there is a Ladies Cut Tee,
I
>find myself using that one the majority of the time.
>I think they are both 6.1 oz.
>
>LuAnn
>----- Original Message -----
>From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxx>
>Sent: Tuesday, April 11, 2006 11:43 AM
>Subject: [amayausers] Re: favorite t-shirt?
>
>
>
>
>>gildan has a heavyweight that is good, but Sanmar has the Port
>>Authority brand (their house brand label) and those teeshirts are a
>>little heavier, little longer, better shirt!
>>Roland
>>
>>Sunrise Graphics
>>116 Main St
>>Claremont, NH 03743
>>603-543-1324
>>fax 603-543-9902
>>www.sunrisegraphics.org
>>signman@xxxxxxxxxxxxxxxxxxx
>>
>>
>>On Apr 11, 2006, at 10:01 AM, Shuffletown Embroidery wrote:
>>
>>
>>
>>>Good morning everyone.
>>>What do you think is the best t-shirt for left-chest embroidery? I
>>>believe
>>>someone once told me there was a Gildan that he thought was
>>>superior, but I
>>>don't remember the style number. I'm doing white tees, and a limited
>>>quantity.
>>>Any tips for stabilizers would be welcome, too. I have tested my
>>>design with
>>>two layers of no-show mesh and a tear/wash-away topper hooped with the
>>>shirt.
>>>TIA,
>>>Mary
>>>
>>>Mary Buckle
>>>Shuffletown Embroidery
>>>Charlotte, NC
>>>704-398-1273
>>>
>>>-----Original Message-----
>>>From: amayausers-bounce@xxxxxxxxxxxxx
>>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Garber
>>>Sent: Monday, April 10, 2006 9:51 PM
>>>To: amayausers list
>>>Subject: [amayausers] XT MT Confusion
>>>
>>>Hello,
>>>
>>>I just received delivery of my first XT. I'm experiencing Material
>>>Thickness differences from the old Amayas. I'm not using the auto
>>>material thickness yet.
>>>Hats sewn at 13 seem to want to sew at 10 or 11. I've set the bobbin
>>>tension a little tighter and I think the result is same. I don't
>>>recall
>>>anyone else running into this.
>>>
>>>Mike
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>
>
>
>
>
>
Other related posts:
