[amayausers.com] Re: false bobbin breaks (Amaya XT)

It sounds as if it may be a faulty sensor. (the bar that the threads are looped 
around before the needle). I had this issue and nothing fixed it but turning 
off the bobbin detection.

--- On Wed, 7/8/09, theboards@xxxxxxxxxxxxxx <theboards@xxxxxxxxxxxxxx> wrote:

From: theboards@xxxxxxxxxxxxxx <theboards@xxxxxxxxxxxxxx>
Subject: [amayausers.com] Re: false bobbin breaks (Amaya XT)
To: amayausers@xxxxxxxxxxxxx
Date: Wednesday, July 8, 2009, 2:45 AM

This message was posted by Alicante on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/307.html#000008

Oh yes and I checked the thread paths. All are correct.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: