[amayausers] Re: error code

no, can't turn the needle bar... only up and down.  I got ahold of Melco
this morning and they are supposed to have someone call me within 24 hours
to set up a tech visit.  Hopefully soon!  We did take the face cover off,
and nothing looks out of place there.

You have been a great help!  Thanks for all the interest!

Loree
Dragonstitch
http://www.dragonstitch.com
custom embroidery
dragonstitch@xxxxxxx
----- Original Message -----
From: "Sharon" <springer37@xxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, August 23, 2004 9:51 AM
Subject: [amayausers] Re: error code


> Loree,
>
> My curiosiy is getting the best of me I guess. You said that the needle
bar
> is free floating, like it is not attached to anything. Can you turn this
> needle bar or spin it around in a 360 degree fashion? Which needle were
you
> on when this happened? Have you found any small piece(s) of metal that may
> have dropped from behind the needle case? There is also the possibility of
a
> broken needle bar stud, which is a lesser problem to repair/.replace than
> the reciprocator part. One you have to take the whole needle case off the
> machine and the other, just the face cover over the needle case.
>
> Rod Springer
> Melco Trained Technician
> (We also do Design Shop Pro+ digitizing)
> Boise, ID
> (208) 938-3038
> springer37@xxxxxxxxxxxx

Other related posts: