[amayausers] Re: error code
- From: "Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Sun, 22 Aug 2004 09:14:55 -0600
I would hope that LiVawne"s advice works for you. It is the loud snapping
noise before it stopped that is worrying me.
Rod Springer
Melco Trained Technician
(We also do Design Shop Pro+ digitizing)
Boise, ID
(208) 938-3038
springer37@xxxxxxxxxxxx
----- Original Message -----
From: "Moore Embroidery and Designs" <moore-embroidery@xxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Sunday, August 22, 2004 6:22 AM
Subject: [amayausers] Re: error code
> I like you have a full time job also and have gotten this before. I had
to
> turn the machine off before the error would clear. Make sure to write
down
> your stitch position before you do this. Turn it off, wait a minute and
> turn it back on. Our error had cleared, the needle bar back intact and we
> moved to the last stitch number and off we went.
>
> Hope this works for you too.
>
> Sincerely,
> LiVawne G Moore
>
> Moore Embroidery & Designs
> 1724 Jerusalem Drive
> Round Rock, TX 78664
> 512-989-0518 Office
> 512-632-7826 Cell
> Moore-Embroidery@xxxxxxxxxx
> www.Moore-Embroidery.com
>
>
>
>
> -----Original Message-----
> From: amayausers-bounce@xxxxxxxxxxxxx
> [mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Dragonstitch
> Sent: Sunday, August 22, 2004 1:40 AM
> To: amayausers@xxxxxxxxxxxxx
> Subject: [amayausers] error code
>
>
> Anyone out there know how to fix a color stepper error? I was doing a
> simple design, and all the sudden the machine made a snapping noise and
> stopped. the needle would not go back up even if I did a Head UP. The
> needle bar would go up and down freely like it was not connected like it
> should be.
> Now when I try to do a Head Up, I get an error message "color change
stepper
> index error - off index while sewing".
> Any help would be nice, I know it's the middle of the weekend, but this is
> the only time I get to sew, as I am full time employed during the week.
>
> TIA,
> Loree
> Dragonstitch
> http://www.dragonstitch.com
> custom embroidery
> dragonstitch@xxxxxxx
>
>
>
>
- Follow-Ups:
- [amayausers] Re: error code
- From: Dragonstitch
- References:
- [amayausers] Re: error code
- From: Moore Embroidery and Designs
Other related posts:
- » [amayausers] error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- » [amayausers] Re: error code
- [amayausers] Re: error code
- From: Dragonstitch
- [amayausers] Re: error code
- From: Moore Embroidery and Designs