[amayausers] Re: directors chair backs

Thanks Roland,

That is a great idea that I haven't thought of.  The chairs that they
currently have at the club have had the stitching covered on the back by
matching fabric.  But, if I sew out a sample with matching bobbin thread and
present them with the option of that and a lower price, they may be
interested.

The customer purchased all the new chairs so they will be giving me their
chair backs.  Royal Blue.

Thank you for your ideas!

Barbara
Avalon
----- Original Message ----- 
From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 9:22 AM
Subject: [amayausers] Re: directors chair backs


> I'm wondering...not having done any of the chair backs but have had
requests
> IF I could find the chairs at a decent price...
> if you color matched your bobbin thread to the chair back-then the
backside
> image would not show up nearly as much....would that be easier than having
> to sew on a second layer of fabric after the embroidery is done? Otherwise
> you have to take the time to cut, hem, and sew on the 'backing' and make
> sure your edge sewing doesn't show up on the 'good' side...
> Or what about using the same color fabric as your backing?
> The 'commercial' company I have a catalog on that does these in quantity
> embroiders so you see it from in front of the chair, from the back you see
> the reverse image...so they don't 'cover' it up.
> Just wondering if these options would be a time and $$ saver or not.
> Roland
>
>

Other related posts: