[amayausers] Re: directors chair backs

Seeing that you have to put a piece of material on the back they might want the name on both sides.

Russell

----- Original Message ----- From: "Avalon Embroidery" <avalonembroidery@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 1:29 PM
Subject: [amayausers] Re: directors chair backs


Very true statement! Luckily, a good friend of mine does upholstery work on
yachts. Maybe this would be a nice job to include her in on!

Barbara
Avalon
----- Original Message ----- From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 9:19 AM
Subject: [amayausers] Re: directors chair backs


I would Imagine if I owned a Yacht and I was getting a special chair
made with my yacht's name on it,
I wouldn't want to see anything on the back.

Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427

420 SW H street
Grants Pass, OR 97526

info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com
----- Original Message ----- From: "Roland R. Irish III" <signman@xxxxxxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, November 22, 2005 9:22 AM
Subject: [amayausers] Re: directors chair backs


> I'm wondering...not having done any of the chair backs but have had
requests 
> IF I could find the chairs at a decent price...
> if you color matched your bobbin thread to the chair back-then the
backside
> image would not show up nearly as much....would that be easier than
having
> to sew on a second layer of fabric after the embroidery is done?
Otherwise
> you have to take the time to cut, hem, and sew on the 'backing' and > make
> sure your edge sewing doesn't show up on the 'good' side...
> Or what about using the same color fabric as your backing?
> The 'commercial' company I have a catalog on that does these in > quantity
> embroiders so you see it from in front of the chair, from the back you
see 
> the reverse image...so they don't 'cover' it up.
> Just wondering if these options would be a time and $$ saver or not.
> Roland




Other related posts: