[amayausers.com] Re: complex fill settings

This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/3/401.html#000003

Some fills automatically start on one side of an area, go part way across, then 
jump to the other side and come back and overlap. Without this overlap (which 
you can change the number of 'rows' it overlaps in properties) you would see a 
definite 'line' between the sewn areas. If there is any puckering of the 
material, this 'line' may open right up wide without the overlap. This may be 
what you are seeing for the 'overlap' area. If the threads are loose/long, 
check the stitch length in 'properties' for that fill. I find the 'default' for 
a lot of the fills are 60 or higher-and I also drop that down to 40 or below 
for a tighter pattern with no loose threads.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: