[amayausers] Re: color of design in Design Shop Pro+

Re: [amayausers] Re: color of design in Design Shop Pro+It's the little button 
with the yellow post it note looking icon and a blue push pin.
once you open a design. then you take and click the icon and it will bring up a
prenumbered text file, then you type in the info you want to save. then go to
file then save. then each time you open the file it should automatically be 
recalled
when the notes button is clicked later.
Most of my problems have only been affected by our multi head set-up
and having the file opened on one machine and then we can't recall the 
info on another machine at the same time.
I'm sure were doing something wrong, since the whole notes thing
has been learned by trial and error for us, we haven't done any reading
about it. so read you manual there's probably lots of good info on the subject.

Ron Vinyard
Body Cover Design
1-888-435-0176
  ----- Original Message ----- 
  From: Roland R. Irish III 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Monday, August 29, 2005 2:11 PM
  Subject: [amayausers] Re: color of design in Design Shop Pro+




    Notepad! Notepad? hmmmmmm...something else we didn't know about!
    Does it 'save' what you have set, or do you have to 'type in' whatever 
notes you want saved? That would be great if we lose the sewout with the 
threads written down! And what's the bugs in it?
    Roland

    From: "Body Cover" <info@xxxxxxxxxxxxxxxxxxx>
    Reply-To: amayausers@xxxxxxxxxxxxx
    Date: Mon, 29 Aug 2005 13:45:11 -0700
    To: <amayausers@xxxxxxxxxxxxx>
    Subject: [amayausers] Re: color of design in Design Shop Pro+




    The only way that the colors would come up right
    is if the design was created or edited in Design shop
    and saved as an .OFM format and only then
    would it show the colors if they were clicked and picked
    in the program and saved afterwards.
    and even then if you have use colors from design
    unchecked in settings it may not show them or show
    them correctly. but once you open the design in Amaya OS
    and set the colors and then save as and name your file
    either a new name or the same old one. the right color
    scheme should show up next time it is opened.
    But, it will only show the color assigned to the thread tree number
    when it was saved. So if you save the design with one part
    being thread 16 which was lt blue at the time and now
    has been changed to be orange, when the design is opened
    it will show it as orange because it save the thread tree number
    sequence not the actual assigned thread chart numbers .

    Hope that makes some sense.
    We use the notepad function to save the color list and then it will
    come up when we open the design. all we do is hit the notepad
    button again and there it is.
    Still working out some of the bugs on that one but it is a cool function.

    Ron Vinyard

Other related posts: