[amayausers] Re: bobbin tension

Hi All,

 Some confusion on bobbin tension. It has changed through the course of the
Amaya development. Current specification, with current up todate machines
and adjustments, (meaning you machine has been adjusted to current specs.,
and all should be by now), is to set the bobbin to drop 2 to 4 inches with a
little jerk to get it to drop.

 Now, looser is great for some things. Delicate materials for instance. A
sweatshirt with a thickness that is going to compress a bit will need a
little tighter than loose to drop on its own. An overall good adjustment is
the 2 to 4 inch drop test.

 Jeff Banks
 Melco Embroidery Systems


----- Original Message -----
From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Friday, April 16, 2004 1:52 PM
Subject: RE: [amayausers] bobbin tension


> Ron,
>
> I would say looser. The recommended method is to let the case drop
> continuously on its own.
>
> Janel Harris
> Dimensional Designs
> http://www.dimdesigns.com
> Contract Digitizer
> Melco On-Site Trainer
>
>
>
> My biggest question was do the amayas like things tighter or
> looser than the standard 2" to 4" drop test.
> Thanks Kevin!
>
> Ron Vinyard
> Owner / Graphic Designer
> Body Cover / Magic Stitches
> 420  S.W. "H" Street
> Grants Pass, OR 97526-2532
>
> 1-888-435-0176
> 1-541-471-1504
> Fax 541-471-0427
> www.bodycoverdesign.com
>
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: