[amayausers.com] Re: applique questions

  • From: "springer37@xxxxxxxxxxxx" <springer37@xxxxxxxxxxxx>
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Wed, 05 Mar 2008 15:40:41 -0700

After reading Wendy's reply, I saw that I had left out a step.....you need to change the walk stictch outline stitch length to something very small, like 2 or 3 points long...this will poke the holes very close together and perf the cardstock so you can just tear it out.....

Rod



On Wed Mar 5 22:06 , 'Itchin To Stitch' sent:

I make my own templates all the time when I'm doing a onsie-twosie job. I also use Heat-n-Bond to adhere the applique' pieces, much better for my machine than spray adhesive.  An applique' iron is also helpful and you can usually aquire one for 40-50% off if you watch fabric store sales flyers. The whole process is pretty easy to do........ I separate the outline stitch and send to the machine. Then I trace the required hoop on cardstock, cut it out and tape to the hoop from the bottom. You will not be using the inner hoop at all. I then turn off all thread detection and pull up the thread feed lever on the needle I'm going to use, pull the thread over so it's not contacting the roller, pull the thread out of the needle eye, take my bobbin case out and let her roll. You will most likely need to run the outline a few times to penetrate the card so it's easier to cut. I have a very good and expensive little scissors that can get into an tight places but you basically follow the holes of the outline stitch. Hopefully this will make sense, if not you can always call one of us.
Wendy Solomonson
Itchin' To Stitch
Arlington, MN
(507)964-2224
----- Original Message -----
Sent: Wednesday, March 05, 2008 3:55 PM
Subject: [amayausers.com] Re: applique questions

Hi Susan...makes sense to me...but I'm a clutz with scissors so having them
sewn out is easier to follow!  LOL
Also it's how they taught us in training.
I had done some of the limos by sewing down a larger piece of stitchsaver,
removing the hoop from the Amaya and cutting around it...but we realized we
could not cut as close in some of the tight corners, and also one tug on the jacket 
wrong and it moved in the hoop-forget about stitching the rest of it and hitting the
outline correctly!

One question...how do get it to stitch the outline without thread to transfer it
to the cardstock?

Roland

On Mar 5, 2008, at 4:42 PM, <suried@xxxxxxxxx> wrote:

Not stupid questions.

If  I am doing just a few shirts, I let the machine stitch the outline placement stitch.  I then cut a piece of fabric that will cover it plus a little extra.  Let the machine do the tackdown and stop the machine.  I then trim the extra fabric away, put back on machine and let it stitch the satin stitch.

If you are doing lots of shirts, I hoop a piece of fabric and I use spray adhesive (make sure to use far away from the machine) on a piece of cardstock.  Stick the cardstock to the fabric and just stitch (you don't even need to use thread) the outline stitch of the applique.  Cut or punch this template out from the cardstock and this is your template for the actual size and shape of fabric you need.

Hope that all makes sense.
 
Susan Riedlinger
Embroidery Station
Columbus, OH


----- Original Message ----
From: Darlene Weber <image_maker31@xxxxxxxxx>
To: Amaya <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, March 5, 2008 12:33:58 PM
Subject: [amayausers.com] applique questions

I have never done an applique with the Amayas.
 
I have Dakota Collectible set and was wondering exactly how appliquing is done using one of those designs.  I guess I understand the tracing stitch it does, but how does everyone get the material pre cut to place when the machine pauses????  Is it possible to make a design in Dakota Collectibles an applique if is not already an applique??/
 
these are probably stupid questions, but I was just wondering!
 
Thanks!


Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.



Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.



Msg sent via CableONE.net MyMail - http://www.cableone.net========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ==========================================================

Other related posts: