[amayausers] Z axis error

Hi all,
Especially any tech types that may be reading.
My operator just informed me that he had a birdnest issue
when I got back from the bank. but know the needle (12)
has dropped down halfway and won't lift up.
I've tried the emergency stop and I've tried the maintenance
tab and tried the head up and head down buttons with no avail.

It clicks and sounds like a solenoid is trying to activate it
the needle bar, but isn't lifting it.

Any ideas or is it Call Melco time??

Suddenly I got a glitch minutes later in another machine.
We couldn't sew anything, it just streams thread as soon
as the start button is pushed. Had my operator baffled!
I looked at all the usuals and didn't see any problems
until I looked at the computer and noticed the screen was
knocked out and could see parts of the background in my
Amaya OS. then I looked at the thread feed. which hadn't
been adjusted and it was 4357!! talk about feeding thread!!

Can't adjust it everything is goofy
so we are shutting down and resetting.
This computer is a stand alone just for the Amaya OS 
and runs nothing else and has no network or internet 
connections.

Just my lucky day!!
If anyone has any ideas what to look for  with the needle bars 
let me know, I am mechanically inclined so I can tear into and
put back together so I am ready for my challenge.

Thanks in advance!

Ron Vinyard
Body Cover / Magic Stitches
1-888-435-0176
541-471-1504
fax 471-0427

420 SW H street
Grants Pass, OR 97526

info@xxxxxxxxxxxxxxxxxxx
www.bodycoverdesign.com

Other related posts: