[amayausers] Re: Y Motor Tracking Error HELP IF YOU CAN

Hi Cheryl,

 The Y Tracking Error is caused by long stitches in the Y Direction. This is 
a "bug" in the Amaya controls that is currently being worked on. The answer 
is to shorten the offending stitches if possible until the problem is 
resolved. If it is a bunch of stitches, and an outline around them, then 
yes, registration can be effected and the outline would need to be adjusted 
as well. I am at home this week but would be willing to look at the design 
for you if you would like. One of the issues here is going to be the fact 
the design is probably a DST file which makes it a little harder to edit as 
the portions needing the edit may need to be broken into wire frame and 
adjusted. You can do editing without breaking it into wire frame, but it can 
be a little more clumsy and tougher to do if you are not used to editing 
individual stitches. If you want to, send me the design to this email 
address and I will look at it for you and see what I can do.

 Jeff Banks
 Melco Embroidery Systems


----- Original Message ----- 
From: "Cheryl Rotter" <tsiemb@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, June 29, 2005 11:11 AM
Subject: [amayausers] Y Motor Tracking Error HELP IF YOU CAN


Hello all,
I am hoping someone might have the time for a quick "bail out" . I am
sewing a design on a hat that I did not digitize (I bought it from our
old contract embroiderer who digitized it for Tajima) and I am getting a
Y motor tracking error every machine every time at a point that looks
like the column movement is too big.  Should I attempt to edit the
column and reduce that column width?  I am a bit worried about
registration since it has an outline. Will just the one or two stitch
changes be significant for my registration?

Thanks for any input.

Cheryl Rotter
Team Sports Ink
5111 Grumann Dr. Ste #1B
Carson City, NV 89706
775-884-3550

Other related posts: