[amayausers] Re: WACF Installation

If you have the hoop size set it may be reaching a hoop limit.  Try setting
a different hoop size and see if it will let you move it then.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, Oregon
----- Original Message ----- 
From: "Cindy@xxxxxxxxx" <cindy@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Tuesday, May 04, 2004 3:47 PM
Subject: Re: [amayausers] WACF Installation


> Hi Janel,
>
> That is what I tried.  Didn't work.  I am thinking there was another
command
> because I moved it all the way back and it locks it in this position?
>
> Thanks,
> Cindy
>
> ----- Original Message ----- 
> From: "Janel Harris" <janel@xxxxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxxxxx>
> Sent: Tuesday, May 04, 2004 6:31 PM
> Subject: RE: [amayausers] WACF Installation
>
>
> > Cindy,
> >
> > To move the x-beam forward press the Hoop and Up Arrow buttons on the
> > keypad.
> >
> > Janel Harris
> > Dimensional Designs
> > http://www.dimdesigns.com
> > Contract Digitizer
> > Melco On-site Trainer
> >
> >
> > -----Original Message-----
> > From: Cindy@xxxxxxxxx [mailto:cindy@xxxxxxxxx]
> > Sent: Tuesday, May 04, 2004 3:15 PM
> > To: amayausers@xxxxxxxxxxxxxxxx
> > Subject: [amayausers] WACF Installation
> >
> >
> >
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: