You have to add it from the tools menu. Go to hoop set up, custome hoop list and select it. Mike Kesavan wrote: >I have a WACF in the drop down list. There is no XT WACF. > > > >I just did it last night. > >Go to Tools, Hoop set up, custom hoop list. Just look in that drop down box >and apply. >Wolf Embroidery >Wolfemb@xxxxxxxx >Lisa and Don Ridley >----- Original Message ----- >From: "Mike Garber" <agraphic2@xxxxxxxxxxxx> >To: <amayausers@xxxxxxxxxxxxx> >Sent: Monday, April 17, 2006 4:08 PM >Subject: [amayausers] Re: Visors on XT driver > > > > >>Anand, >>I think I was in hoop setup? There was a list of hoops not on the drop >>down list. I selected the XT WACF and its loaded. Sorry, I'm losing my >>mind. I'm not at my embroidery computer and I can't remember exactly >>how I did it......I'll reply again after I research my steps. >> >>Mike >> >>Kesavan wrote: >> >> >> >>>Where is the XT Extended? >>> >>>Thanks >>> >>> >>> >>> >>>OK, sewing hats with the WACF hoop selected on the XT machine will give >>>you burned bills.... >>>The 'XT Extended WACF' hoop selection is not loaded on the drop down >>>menu. Once added to the hoop menu and selected the design cannot go as >>>low as the WACF hoop and no more hats rubbing. I knew it was me.... >>> >>>Mike >>> >>>Mike Garber wrote: >>> >>> >>> >>> >>> >>>>Morning, >>>> >>>>Has anyone sewn a sportsman visor on the XT cap driver. I loaded one up >>>>an was able to sew closer to the brim which was exciting. The problem >>>>is the visor rubbed on the back of the needle bar and burned a big hole >>>>in it. >>>> >>>>The other thing I'm struggling with is unstructured hats are very loose >>>>and wrinkled on the machine. I think its the low needle plate. On the >>>>old machine I was able to get away with one piece of 4" tearaway on just >>>>a front design. The hat on the new machine has alot of loose material >>>>in front of the needle. >>>> >>>>Anyone? >>>> >>>>Mike >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >>> >>> >>> >>> >>> >> >> >> >> >>-- >>No virus found in this incoming message. >>Checked by AVG Free Edition. >>Version: 7.1.385 / Virus Database: 268.4.2/314 - Release Date: 4/16/2006 >> >> >> > > > > > > >