[amayausers] Re: Unsolved thread breakage problem

I use mainly Robison-Anton thread and don't have many thread problems.  I do
like the ARC Poly for my white and black, they seem to run better than R/A.
I use R/A because I got used to the names of the colors I like.  Seems all
other thread manufacturers use #'s instead of names, a little harder to get
used to after using R/A so long.


Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR
----- Original Message -----
From: "Mike Wargo" <sati@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>
Sent: Monday, December 08, 2003 8:55 AM
Subject: Re: [amayausers] Unsolved thread breakage problem


>             I don't believe the direction which the thread comes off the
> spool is a problem, if the correct twist is applied when the spool is
wound
> the thread should feed off the spool with no twists or tangles. The
excessive
> drag of the thread against the spool is the problem. A number of years ago
> when this thread first came out I had called ARC and questioned them about
> it, I was told "no one else was having this problem". I also found an
issue
> with the knots buried in the spools!
>
>             Perhaps some machine issues can be corrected by switching
thread
> brands?
>
>
>             Mike Wargo
>             Fox Hill
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: