[amayausers] Re: Trimmer problems

Wendy,
Dak fonts do not have tie-ins & tie offs.  Go into Properties and Select
Lock Trims.  You should at least have the capability of selecting Always if
you cannot select one of the five tie-in and tie-off methods.  Select Always
and try that.  Hope it helps.  Let us know.
Sharon
Rod Springer
Melco Trained Technician/Owner
(Design Shop Pro+ Digitizing)
Boise, ID
(208) 938-3038
springer37@xxxxxxxxxxxx
----- Original Message ----- 
From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, December 20, 2004 6:59 AM
Subject: [amayausers] Re: Trimmer problems


> Sharon,
> Balloon dak at .65 height. I'm at my regular job today but will check my
> e-mails.
> Thanks!
> Wendy
> ----- Original Message ----- 
> From: "Sharon" <springer37@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Monday, December 20, 2004 12:26 AM
> Subject: [amayausers] Re: Trimmer problems
>
>
> > Wendy, what font are you using?  Maybe we can in some way help you.
> > Sharon
> > Rod Springer
> > Melco Trained Technician/Owner
> > (Design Shop Pro+ Digitizing)
> > Boise, ID
> > (208) 938-3038
> > springer37@xxxxxxxxxxxx
> > ----- Original Message ----- 
> > From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
> > To: <amayausers@xxxxxxxxxxxxx>
> > Sent: Sunday, December 19, 2004 9:39 PM
> > Subject: [amayausers] Re: Trimmer problems
> >
> >
> > > Sharon,
> > > Can you explain that better? I looked at the lock/trim tab on the
> > lettering
> > > properties and the box that is enable is 'lock if connector greater
tat
> > > 0.252' and 'trim if connector greater than 0.252'. I can see boxes
with
> > tie
> > > in type and tie off type and pull down menus next to each with styles
> put
> > > I'm not able to use them. I have just the Design Shop level of
software,
> > is
> > > this the problem or am I not looking in the right place?
> > > I'm going to home to bed but will look for a response in the a.m.
> > > Thanks!
> > > Wendy
> > > Itchin' To Stitch
> > > MN
> > > ----- Original Message ----- 
> > > From: "Sharon" <springer37@xxxxxxxxxxxx>
> > > To: <amayausers@xxxxxxxxxxxxx>
> > > Sent: Sunday, December 19, 2004 10:35 PM
> > > Subject: [amayausers] Re: Trimmer problems
> > >
> > >
> > > > Hi Wendy,
> > > > I shared your delima with Rod and his first question is what lock
> stitch
> > > are
> > > > you using on the lettering?  If not 5, try it if you have the
> > capability.
> > > > Sharon
> > > > Rod Springer
> > > > Melco Trained Technician/Owner
> > > > (Design Shop Pro+ Digitizing)
> > > > Boise, ID
> > > > (208) 938-3038
> > > > springer37@xxxxxxxxxxxx
> > > > ----- Original Message ----- 
> > > > From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
> > > > To: "Amaya User Group" <amayausers@xxxxxxxxxxxxx>
> > > > Sent: Sunday, December 19, 2004 9:16 PM
> > > > Subject: [amayausers] Trimmer problems
> > > >
> > > >
> > > > > I hope the group can point me in the right direction on this one.
I
> > have
> > > a
> > > > design I'm sewing on a jacket back and I've had continual problems
> with
> > > the
> > > > trimmer not trimming completely at a trim. It's a thin nylon jacket
> with
> > > > jersey knit lining, full back design of an outlined dancer and
> > lettering.
> > > > The lettering is the culprit. I'm using my large wooden rectangular
> > hoop,
> > > > one pc. of light tearaway, material thickness of 5, 70/10 sharp
(new)
> > and
> > > > slowed the machine down to reduce flagging. I've tried other needles
> on
> > > the
> > > > machine and the same thing happens with this design. I have to
babysit
> > the
> > > > machine while it sews the lettering to make sure the trims happen.
> > > Everytime
> > > > I get an incomplete trim I have to pull a piece of thread that gets
> > caught
> > > > in the trimmer. I've looked at the operators manual in
troubleshooting
> > but
> > > > didn't see anything on the trimmer. Any ideas on this. It seems I
have
> > > this
> > > > problem when I sew on nylon fabric. I've got to sew three more
jackets
> > and
> > > > it takes me for
> > > > >  ever to get through them.
> > > > > TIA,
> > > > > Wendy
> > > > > Itchin' To Stitch
> > > > > MN
> > > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
>

Other related posts: