[amayausers] Re: Trimmer problems

Wendy, what font are you using?  Maybe we can in some way help you.
Sharon
Rod Springer
Melco Trained Technician/Owner
(Design Shop Pro+ Digitizing)
Boise, ID
(208) 938-3038
springer37@xxxxxxxxxxxx
----- Original Message ----- 
From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Sunday, December 19, 2004 9:39 PM
Subject: [amayausers] Re: Trimmer problems


> Sharon,
> Can you explain that better? I looked at the lock/trim tab on the
lettering
> properties and the box that is enable is 'lock if connector greater tat
> 0.252' and 'trim if connector greater than 0.252'. I can see boxes with
tie
> in type and tie off type and pull down menus next to each with styles put
> I'm not able to use them. I have just the Design Shop level of software,
is
> this the problem or am I not looking in the right place?
> I'm going to home to bed but will look for a response in the a.m.
> Thanks!
> Wendy
> Itchin' To Stitch
> MN
> ----- Original Message ----- 
> From: "Sharon" <springer37@xxxxxxxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Sunday, December 19, 2004 10:35 PM
> Subject: [amayausers] Re: Trimmer problems
>
>
> > Hi Wendy,
> > I shared your delima with Rod and his first question is what lock stitch
> are
> > you using on the lettering?  If not 5, try it if you have the
capability.
> > Sharon
> > Rod Springer
> > Melco Trained Technician/Owner
> > (Design Shop Pro+ Digitizing)
> > Boise, ID
> > (208) 938-3038
> > springer37@xxxxxxxxxxxx
> > ----- Original Message ----- 
> > From: "Itchin To Stitch" <itchin@xxxxxxxxxxxxxxx>
> > To: "Amaya User Group" <amayausers@xxxxxxxxxxxxx>
> > Sent: Sunday, December 19, 2004 9:16 PM
> > Subject: [amayausers] Trimmer problems
> >
> >
> > > I hope the group can point me in the right direction on this one. I
have
> a
> > design I'm sewing on a jacket back and I've had continual problems with
> the
> > trimmer not trimming completely at a trim. It's a thin nylon jacket with
> > jersey knit lining, full back design of an outlined dancer and
lettering.
> > The lettering is the culprit. I'm using my large wooden rectangular
hoop,
> > one pc. of light tearaway, material thickness of 5, 70/10 sharp (new)
and
> > slowed the machine down to reduce flagging. I've tried other needles on
> the
> > machine and the same thing happens with this design. I have to babysit
the
> > machine while it sews the lettering to make sure the trims happen.
> Everytime
> > I get an incomplete trim I have to pull a piece of thread that gets
caught
> > in the trimmer. I've looked at the operators manual in troubleshooting
but
> > didn't see anything on the trimmer. Any ideas on this. It seems I have
> this
> > problem when I sew on nylon fabric. I've got to sew three more jackets
and
> > it takes me for
> > >  ever to get through them.
> > > TIA,
> > > Wendy
> > > Itchin' To Stitch
> > > MN
> > >
> >
> >
> >
> >
>
>
>

Other related posts: