[amayausers] Trimmer problems

I hope the group can point me in the right direction on this one. I have a 
design I'm sewing on a jacket back and I've had continual problems with the 
trimmer not trimming completely at a trim. It's a thin nylon jacket with jersey 
knit lining, full back design of an outlined dancer and lettering. The 
lettering is the culprit. I'm using my large wooden rectangular hoop, one pc. 
of light tearaway, material thickness of 5, 70/10 sharp (new) and slowed the 
machine down to reduce flagging. I've tried other needles on the machine and 
the same thing happens with this design. I have to babysit the machine while it 
sews the lettering to make sure the trims happen. Everytime I get an incomplete 
trim I have to pull a piece of thread that gets caught in the trimmer. I've 
looked at the operators manual in troubleshooting but didn't see anything on 
the trimmer. Any ideas on this. It seems I have this problem when I sew on 
nylon fabric. I've got to sew three more jackets and it takes me forever to get 
through them. 
TIA,
Wendy
Itchin' To Stitch
MN

Other related posts: