[amayausers] Re: Thread looping....

just to respond back.....we didn't have any problems last night, but to let 
you know, the first word we were having loops in was only 1/4 inch & the 
second word was 1/2 inch.....we were given the shirts to do, so if we had 
messed up on one, we had to go get another one....that didn't happen thank 
goodness.....we were also given a sample shirt that we had to match up the 
lettering & size to, so it wasn't real easy at first.  Thanks for all of 
your suggestions!!!

Phyllis
Phyllis B's Wicked Stitches
pxyphil@xxxxxxxx

At 04:57 PM 5/13/2004 -0400, you wrote:
>For a t-shirt you might try only a material thickness of 3 or 4. Your
>pressure foot should be almost at the bottom or maybe 1 click up. What is 
>the size of
>your lettering? Double check your bobbin tension as well.
>
>Dorothy Compton, Owner
>Bee Embroidered
>www.BeeEmbroidered.com
>(916) 635-7467
>
>In a message dated 5/13/2004 1:45:31 PM Pacific Daylight Time,
>pxyphil@xxxxxxxx writes:
>
> > we have changed the needle, we were only using white thread &even changed
> > to a different brand of thread, I had moved the pressure foot up &down &I
> > had the material thickness high......we were only trying to do a logo on
> > navy blue Jerzee tee shirts.....we were using 2 different lettering styles
> > from the Design Shop....it's completely frustrating.....how far would you
> > suggest taking the pressure foot up?  we were using a mess backing &a
> > tearaway waffle weave backing &had it on material thickness of "8"....
> >



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: