[amayausers] Re: Thread looping....

we have changed the needle, we were only using white thread & even changed 
to a different brand of thread, I had moved the pressure foot up & down & I 
had the material thickness high......we were only trying to do a logo on 
navy blue Jerzee tee shirts.....we were using 2 different lettering styles 
from the Design Shop....it's completely frustrating.....how far would you 
suggest taking the pressure foot up?  we were using a mess backing & a 
tearaway waffle weave backing & had it on material thickness of "8"....


At 04:36 PM 5/13/2004 -0400, you wrote:
>Needles, pressure foot and material thickness.  I found the help function
>for material thickness is low.  I usually go about 2 higher than
>recommended.
>
>What fabric are you stitching on?
>
>Lisa A Ridley
>Wolf Embroidery
>Wolfemb@xxxxxxxx
>----- Original Message -----
>From: "Phyllis A. Barclay" <pxyphil@xxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxxxxx>
>Sent: Thursday, May 13, 2004 4:05 PM
>Subject: [amayausers] Thread looping....
>
>
> > Can anyone help out & tell me why we keep getting thread that is looping
> > when we are doing lettering & then it is also shredding the thread??  Any
> > advice would be appreciated!!
> >
> > Phyllis Barclay
> > Phyllis B's Wicked Stitches
> > pxyphil@xxxxxxxx
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> > For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
> >
> >
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
>For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: