[amayausers] Re: Thread feeding

  • From: webmaster@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Mon, 27 Nov 2006 19:39:45 UT

This message was posted by J&O Enterprises on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/52.html#000009

I noticed that above 1250 or so SPM the machine was definitely making some more 
noise.  I sort of ran it that high for a test.  However after seeing it, I will 
definitely feel comfortable at the right times to run 1000-1200 SPM.  
Obviously, some threads, materials and design would not well at that speed, but 
it is nice to know the machine will do it.

Thanks,  :) 
Jim
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: