This message was posted by J&O Enterprises on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/52.html#000005 Update: I cleaned the rollers/greased, and reinstaleld. The result was the same. I swapped rollers from an adjacent neeedle. The result was the same, while the other needle continued to sew well as before. Thus, in my estimation this particulalr pincher arm is not exerting enough force, or is not moving down far enough (either way). As a test, I simply placed my finger on the pincher arm tab while sewing, and the sew returned to a perfect tension. Which confirms to me, that this particular pincher arm is just not really "snapping" down into position like the other arms. Thanks, Jim =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================