[amayausers] Re: Thread feeding

  • From: webmaster@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Fri, 24 Nov 2006 05:30:17 UT

This message was posted by J&O Enterprises on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/2/52.html#000004

Thanks Russell,

While sewing later tonight on another needle, it made loose threads.  What I 
found on this needle was that when the pinch-roller is "down", you can EASILY 
pull thread through it.  If you put just a breath of extra pressure on the 
pinch-roller tab, it locks the thread just like the other needles.  This I 
cleaned the rollers, but it did not make a difference.  How do you get the 
pincher-roller to apply more pressure to thread?
Thanks - (I've only had machines 1 week)
=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: