[amayausers] Re: Thread feeder roller problem

I'm sure you'll soon get replies form the Techs on the list.
but I do know from experience that the thread feed rollers
roll freely on any unused needle, but on the active needle
it is not.

Ron Vinyard - Owner
Body Cover Design
1-888-435-0176
  ----- Original Message ----- 
  From: AthenaAccents@xxxxxxx 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Wednesday, June 29, 2005 9:34 AM
  Subject: [amayausers] Thread feeder roller problem


  Greetings all!

      My partner and I have had our Amaya since January and we're loving her 
(most of the time) and doing pretty well considering we're still not fully 
trained.  We had one onsite day of training and will complete our other 
training this summer @ the NJ facility.  We've been "lurking" around the list 
and getting lots of great tips, insight,  and a few good chuckles from your 
posts.  We just had some birdsnesting  both at the needle plate and at the 
thread feeder roller on a  heavily used color.  We seem to have solved the 
problem for now.... 

  but our question is this:  When the needle carriage is stopped at the needle 
of the moment, is the thread feeder roller supposed to be impossible to turn?  
We noticed during our 4,000,000 st maintenance that the one roller we couldn't 
budge was also the one the machine had stopped at.  Hope I've explained this 
clearly...

  Kim 
  @ Athena Embroidery Accents
      Philadelphia, PA

Other related posts: