[amayausers] Re: Thread Breaks at start

take rollers out wash in warm soapy water dry good, re grease and go.
Check  needle for burrs, check bobbin tension, blow out bobbin.
check settings, make sure everything is set where you left off.
Bev
Perdido Beach Embroidery
----- Original Message ----- 
From: <webmaster@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Friday, December 29, 2006 11:05 PM
Subject: [amayausers] Re: Thread Breaks at start


> This message was posted by sschroed2 on AmayaUsers.com. PLEASE DO NOT 
> REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
> here: http://www.amayausers.com/boards/ultimatebb.php?/topic/8/61.html
>
> PLEASE HELP!
> Last night I finished sewing out a 52000 stitch design with no problems. 
> This morning I tried to sew same design out and the machine stitches about 
> 4 to 6 stitches, moves about 3 inches (when it shouldn't) and then thread 
> breaks.  I have checked everything I can think of and tried several 
> different designs and the same thing happens.
> Does anyone have an idea what is causing this.  Any techs out there that 
> could offer assistance please.  I know Melco is closed til after the 1st 
> and I need help now.
>
> I appreciate any help.
> Sue Schroeder
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
>
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.409 / Virus Database: 268.16.0/609 - Release Date: 12/29/2006
> 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: