[amayausers.com] Re: Thread Breaks and Humidity?????

This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/2/599.html#000006

double check your needle 'plate' lineup-Sue always gets it off to one side and 
swears it's lined up-I check and can tell by my finger tips if it's off...get 
out a magnifying glass and it is.
Just a hair to one side will rub the thread against something enough to break 
it.
On all your needles, run the edge of a pair of tweezers down each side-if you 
feel a 'click' then you know the needle is bent on the end-yank it out and 
replace it.
We find that if we have run hats or totes-usually the needles have taken a 
beating. Shirts and sweats, never a problem.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: