[amayausers.com] Re: Thread Breaks On All Needles

This message was posted by Vegas Embroidery on AmayaUsers.com. PLEASE DO NOT 
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking 
here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/611/2.html#000025

I came in the store over the weekend to finish an order on some hats. The logo 
which was digitzied sewed out great with out issues.

Today I'm back and working on other order of different hats. I have to put some 
small words on the back of flexfit hat and there are thread breaks, too much 
bobin showing etc. 

I am using the slim line 5.5 circle hoop with cap backing on my 65-9 sharp 
needle which I just replaced. I also oiled the hook as recommended before 
starting work. The lettering is melco block at .35" high. I adjusted material 
thickness and checked the pressor foot. No luck.

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

Other related posts: