[amayausers.com] Re: Thead tension.

This message was posted by Wishes on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/267.html

I was trying to do a design and had a lot of white bobbin thread showing on the 
top.  Tightened the bobbin tension.  That problem went away but I had a lot of 
thread breaks.  After changing the needles, using different threads, adjusting 
pressure foot, changing to a different bobbin, I did the I test with all of the 
stripes.  In looking at the back of the test I am finding a pattern of small 
triangles on all needles.  Starts with about five stitches in solid color then 
a white stitch that gradually changes to shorter stitches till it comes to a 
point, a full color stitch and then the triangles. All the time actifeed was 
on.  This is happening on the XT and not the Amaya. I have just installed the 
newest version of DS and OS.  Any suggestions at to what is happening?
Margaret

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: