HK Acree <hkacree@xxxxxxxxxxxx> wrote:Kris, Welcome to our little chamber of doom. What kind of backing are you using? What kind of fabric are you sewing on? Herb Royal Embroidery ----- Original Message ----- From: "Kris Nesheim" To: Sent: Tuesday, April 19, 2005 6:11 PM Subject: [amayausers] Re: Tall Polo Shirts > My name is Kris and I have never asked a question or used the amayausers > list before, but I need some help with a jacket we are doing , it's a golf > type jacket with taffeta lining, I was told to hoop it and then tighten > hoop put density to 12 and many other things, sharp needle etc. But it > still looks like it puckers after we sew it. We are new to embroidery and > wonder if there is anything else anyone could suggest? > Linen Barn wrote:Tri-Mountain has them up to 6xlt. > http://www.trimountain.com/ > > Aaron Sargent > The Linen Barn > linen@xxxxxxxxxxx > Medford, Oregon > ----- Original Message ----- > From: "David Lindsey " > To: > Sent: Tuesday, April 19, 2005 11:26 AM > Subject: [amayausers] Tall Polo Shirts > > >> Looking for Tall Polo Shirts. Can anybody help? >> >> Thanks, >> David >> >> >> >> David Lindsey >> Vector Shirts >> Hamlet, NC >> >>Thanks for answering so quickly, the jacket is cotton and the lining is >>taffeta. I had spoken to Colleen from Melco training and she suggested to go >>to 12 material thickness use a hoop with athletic tape on it and use a sharp >>needle. We put this same design on polo shirts and sweatshirts and it turned >>out great. I've read many suggestions from this list and will keep trying . >>Thanks for your input. Oh we were using two cut away backing and someone >>else suggested polymesh we tried that also. > > > > >