[amayausers] Re: THREAD THROWING OFF TO THE LEFT

Take out the thread feed roller and pinch rollers.  Get some lightly soapy
water - and clean them off including any remnant grease.  Repeat if
necessary till all the grime is off.  Then rinse with water very well.  Dry
with a soft cloth.  Then regrease both items appropriately and put them back
on the machine.  

Should work.  If it doesn't - replace one or both.

John

-----Original Message-----
From: amayausers-bounce@xxxxxxxxxxxxx
[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Tom Ladow
Sent: Friday, September 22, 2006 8:47 AM
To: amayausers@xxxxxxxxxxxxx
Subject: [amayausers] THREAD THROWING OFF TO THE LEFT


I  have experienced the thread being thrown off to the left (as you look at
the roller)on one of my red feed rollers.  This is new kink for me but has
virtually rendered this needle position useless.  Any ideas on how to fix
this problem, I sure would appreciate it.

Tom L.
Indiana



=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

=========================================================== 

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: