[amayausers] Re: Stitching hats

Darlene,
First step is to hoop up one of your caps. Then measure (fabric tape measure 
works best) from the center of the cap to the center of where you want the 
side designs to be. Then in DS, turn on your grid. Then right click on it, 
grid properties come up. Now you can specify what spacing you want the grids 
to be. Set the spacing to be the same as the measurement and that's where 
you center the side designs. Hope this helps.

Herb
Royal Embroidery
----- Original Message ----- 
From: "Darlene Weber" <image_maker31@xxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Sunday, March 26, 2006 7:59 AM
Subject: [amayausers] Stitching hats


>I have my first order for baseball caps that will have a logo on the front 
>and they also have asked for a small design on each side of the caps.  Can 
>someone give me some pointers as to how to make sure that the side designs 
>are even on the caps??
>
>  Thanks for all of your help!!
>  Darlene
>
>
>
> ---------------------------------
> Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ 
> countries) for 2¢/min or less.
>
>

Other related posts: