[amayausers] Re: Stitch problem

Check the thread feed roller.  They start to get a groove in them an can
cause loose stitches.  Also make sure your bobbin tention is fine.

Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
Medford, OR

----- Original Message -----
From: "Captain Gold" <captaingold@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxxxxx>; <embroideryList@xxxxxx>;
<Embroideryline@xxxxxxxxxxxxxxxx>
Sent: Friday, October 10, 2003 1:57 PM
Subject: [amayausers] Stitch problem


> I've run into something new, and it's creating a big problem! I'm doing
> Group Names on polo shirts. I'm using cut away and Solvy and Melco Micro
> Block at .5 inches in black thread. Two of the three names I've done so
far
> are pulling out.
>
> My questions are:
>
> 1. Why is this happening?
>
> 2. How do I fix it (the worst one is still hooped. & I'm hoping I stopped
> the other one with Fray Check, but an afraid to continue until I solve
this
> problem.
>
> I need to solve this tonight so I can ship the shirts tonight or tomorrow
> morning before 8:00 am.
>
> Thanks,
> Connie Bechtel
> Wyvern Productions
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>


---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: