[amayausers] Re: Still need help - and am willing to paypal for it...

"HOLD" was exactly what I was looking for!  Thank you.  Didn't think to look in 
the OS.


---------- Original Message ----------------------------------
From: "Lee or Terri Hoover" <lhoover2@xxxxxxxxxxxxxxxx>
Reply-To: amayausers@xxxxxxxxxxxxx
Date:  Fri, 19 Aug 2005 20:13:15 -0500

>To answer your question - yes.  When you do your colors/needle setting in
>OS, you can insert a pause, stop, hold - there are some others.  At any
>rate, I'm not very experienced at using those and the help on them needs
>more detail.  I imagine someone can explain in better detail than I.  There
>is one of them that causes it to go back and repeat the colors.  Not what I
>had wanted...
>
>Terri Hoover
>Embroidery Creations
>
>-----Original Message-----
>From: amayausers-bounce@xxxxxxxxxxxxx
>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of John Yaglenski
>Sent: Friday, August 19, 2005 8:06 PM
>To: amayausers@xxxxxxxxxxxxx
>Subject: [amayausers] Re: Still need help - and am willing to paypal for
>it...
>
>Ok, to end the saga.... Here's what we ended up doing.
>
>Took Ron's advice... And used tear away under the fills stitch portion of
>the cross.  And... It covered beautifully.  The only drawback was having to
>stand like a hawk over the stop button after the fill was done and it went
>to the satin border.
>
>Is there any way to program a STOP into a design... Where you would have to
>press start to get it going again?  If not, something for the design team.
>
>Anyway, took the original design I posted, sized to 85%, increased pull comp
>to 115% - then widened the border around the cross to 130% pull comp and
>sewed away. 
>
>Considering 60 shirts needed to be done tomorrow, this was a life saver.
>
>Thank you to all who offered help and suggestions.  This list is the best!
>
>JOHN
>
>- - - - - - - -
> 
>
>John Yaglenski
>Levelbest Embroidery
>
>I: www.levelbestembroidery.com
>P: 301.591.2481
>
>This e-mail message and any attachments are confidential and may be
>privileged.  If you are not the intended recipient, please notify Levelbest,
>immediately -- by replying to this message or by sending an e-mail to
>john@xxxxxxxxxxxxx -- and destroy all copies of this message and any
>attachments.  Thank you. 
>
> 
>
>:-----Original Message-----
>:From: amayausers-bounce@xxxxxxxxxxxxx 
>:[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Body Cover
>:Sent: Friday, August 19, 2005 6:24 PM
>:To: amayausers@xxxxxxxxxxxxx
>:Subject: [amayausers] Re: Still need help - and am willing to 
>:paypal for it...
>:
>:Seriously John
>:Sew a sample on black and hoop a
>:piece of thin tearaway as a topping.
>:When the fill sections sew stop and
>:tear it away before the edging goes down.
>:It is amazing how much that helps hide the shirt show through. 
>:It doesn't work on everything but I've found the extra time it 
>:takes is less than the extra sew time from lower densities 
>:used to get the coverage.
>:
>:Just my 2 cents.
>:
>:Ron Vinyard
>:Body Cover Design
>:1-888-435-0176
>:
>:----- Original Message -----
>:From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>:To: <amayausers@xxxxxxxxxxxxx>
>:Sent: Friday, August 19, 2005 1:37 PM
>:Subject: [amayausers] Re: Still need help - and am willing to 
>:paypal for it..
>:
>:
>:> Hi Jeff:
>:> 
>:> Original is at:
>:> 
>:> http://www.levelbestembroidery.com/customers/files/72749LEV.dst 
>:> 
>:> Graphic representation is at:
>:> 
>:> http://www.levelbestembroidery.com/customers/files/72749LEV.jpg
>:> 
>:> Like I mentioned, we need it at least 15% smaller.  (I might 
>:have said 20
>:> previously but 15% I think works better).
>:> 
>:> We are sewing this out on a black Nike Polo and the color 
>:order in the
>:> design sequence at the bottom is as follows....
>:> 
>:> 1) Light Grey
>:> 2) White
>:> 3) Light Grey
>:> 4) Black
>:> 5) Black
>:> 
>:> Thanks for looking at this ;)  I realize getting white and 
>:light grey to
>:> cover black is difficult, but there must be a way.
>:> 
>:> Sometimes I get very frustrated.  I do design work for a 
>:living, and when I
>:> can't make something look in sewing like it looks on paper, 
>:it drives me
>:> batty.  Sometimes I think I am too much of a perfectionist.
>:> 
>:> - - - - - - - -
>:> 
>:> John Yaglenski
>:> Levelbest Embroidery
>:> 
>:> I: www.levelbestembroidery.com
>:> P: 301.591.2481 / 888.229.1779
>:> F: 501-631-4544
>:> 
>:> This e-mail message and any attachments are confidential and may be
>:> privileged.  If you are not the intended recipient, please 
>:notify Levelbest,
>:> immediately -- by replying to this message or by sending an e-mail to
>:> john@xxxxxxxxxxxxx -- and destroy all copies of this message and any
>:> attachments.  Thank you. 
>:> 
>:> 
>:> 
>:> 
>:> -----Original Message-----
>:> From: amayausers-bounce@xxxxxxxxxxxxx
>:> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Banks
>:> Sent: Friday, August 19, 2005 4:17 PM
>:> To: amayausers@xxxxxxxxxxxxx
>:> Subject: [amayausers] Re: Still need help - and am willing 
>:to paypal for
>:> it...
>:> 
>:> Hi John,
>:> 
>:> I have been reducing it more thinking the one you uploaded was the
>:> original. :)
>:> 
>:> I would like to see the original as well, and ask the colors 
>:being used? 
>:> Shirt, and design colors?
>:> 
>:> Jeff
>:> 
>:> 
>:> ----- Original Message -----
>:> From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>:> To: <amayausers@xxxxxxxxxxxxx>
>:> Sent: Friday, August 19, 2005 1:31 PM
>:> Subject: [amayausers] Re: Still need help - and am willing 
>:to paypal for
>:> it...
>:> 
>:> 
>:>> Hey Jeff:
>:>>
>:>> Yep.  It looks pretty good there.  The fill is better (not perfect) 
>:>> but better, and the lines are better defined.  Probably should have 
>:>> uploaded the original as well.
>:>>
>:>>
>:>> - - - - - - - -
>:>>
>:>>
>:>> John Yaglenski
>:>> President / Chief Executive Officer
>:>> Levelbest Communications
>:>>
>:>> I: www.levelbest.com
>:>> P: 301.591.2481 / 888.229.1779
>:>> F: 501-631-4544
>:>>
>:>> active website design . web hosting . content driven websites
>:>>
>:>> This e-mail message and any attachments are confidential and may be 
>:>> privileged.  If you are not the intended recipient, please notify 
>:>> Levelbest, immediately -- by replying to this message or by 
>:sending an 
>:>> e-mail to john@xxxxxxxxxxxxx -- and destroy all copies of 
>:this message 
>:>> and any attachments.  Thank you.
>:>>
>:>>
>:>>
>:>> -----Original Message-----
>:>> From: amayausers-bounce@xxxxxxxxxxxxx
>:>> [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Banks
>:>> Sent: Friday, August 19, 2005 3:29 PM
>:>> To: amayausers@xxxxxxxxxxxxx
>:>> Subject: [amayausers] Re: Still need help - and am willing 
>:to paypal 
>:>> for it...
>:>>
>:>> John,
>:>>
>:>> Question, does it look right before reducing the size 20%?
>:>>
>:>> Jeff Banks
>:>> Melco Embroidery Systems
>:>>
>:>>
>:>> ----- Original Message -----
>:>> From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>:>> To: <amayausers@xxxxxxxxxxxxx>
>:>> Sent: Friday, August 19, 2005 12:35 PM
>:>> Subject: [amayausers] Still need help - and am willing to 
>:paypal for it...
>:>>
>:>>
>:>>> Hey All:
>:>>>
>:>>> That design I sent still is sewing poorly.  I am at a 
>:loss.  I don't 
>:>>> know how to improve it.  Is there anyone that can look at 
>:it or even 
>:>>> might be able to do it from scratch?  I am willing to pay for the 
>:>>> digitizing or help.
>:>>> I have an order that needs to go out and I just can't get 
>:this thing 
>:>>> to sew out up to my standards.
>:>>>
>:>>> John Yaglenski
>:>>> Levelbest Embroidery
>:>>>
>:>>> I:  <http://www.levelbest.com/> www.levelbestembroidery.com
>:>>> P: 301.591.2481 / 888.229.1779
>:>>> F: 501-631-4544
>:>>>
>:>>>
>:>>> This e-mail message and any attachments are confidential 
>:and may be 
>:>>> privileged.  If you are not the intended recipient, please notify 
>:>>> Levelbest, immediately -- by replying to this message or 
>:by sending 
>:>>> an e-mail to <mailto:john@xxxxxxxxxxxxx> john@xxxxxxxxxxxxx -- and 
>:>>> destroy all copies of this message and any attachments.  Thank you.
>:>>>
>:>>>
>:>>
>:>>
>:>>
>:>> 
>:> 
>:> 
>:>
>:
>:
>
>
>
>
 




________________________________________________________________
Sent via the WebMail system at mail.levelbest.com


 
                   

Other related posts: