[amayausers] Re: Setting hooptech frames

Wendy-

for the TCS1 3.5" x 4.5":
x-dimension = 3.5"
y-dimension = 4.5"
X Hoop Offset = 0
Y Hoop Offset = -2.374 (that's negative, and yours may differ by an
eighth-inch or so)
thickness = 0.252
default sew margin = 0.35 in.

for the TCS1 4.5" x 4.5":
x-dimension = 4.5"
y-dimension = 4.5"
X Hoop Offset = -.126 (just an eighth inch correction; may not be req'd)
Y Hoop Offset = -2.374 (that's negative, and yours may differ by an
eighth-inch or so)
thickness = 0.252
default sew margin = 0.35 in.

Hope this helps. I now have the TCS2 and use it a LOT. Bigger windows for
bigger designs.

Sincerely,

David O'Connor
O'Connor & Co. Custom Embroidery
Westerville, OH

----- Original Message ----- 
From: "wl solomonson" <wlsolomonson@xxxxxxxxxxx>
To: <Amayausers@xxxxxxxxxxxxxxxx>
Sent: Sunday, January 11, 2004 8:41 PM
Subject: [amayausers] Setting hooptech frames


> Hey all,
> I've been playing around with my HoopTech clamping system trying to define
> my hoops. As usual, the Amaya users manual's directions are too vague for
> me. I think I am measuring correctly to get my X&Y dimensions but not sure
> about the offsets. Rather than reinventing the wheel is there any Amaya
> owner that has the Hoop Tech system that would be willing to share the
hoop
> definitions to at least use as a guide? I have a 2.5x4, 3.5x4 and 4.5x4.5.
> Thanks for anything that comes my way!
> Wendy
> Itchin' To Stitch
> MN
>
> _________________________________________________________________
> Learn how to choose, serve, and enjoy wine at Wine @ MSN.
> http://wine.msn.com/
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
> For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx
>
>



---------------------------------------------------------------------
To unsubscribe, e-mail: amayausers-unsubscribe@xxxxxxxxxxxxxxxx
For additional commands, e-mail: amayausers-help@xxxxxxxxxxxxxxxx

Other related posts: