This message was posted by Buy The Stitch on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/3/204.html#000009 This may go against every law of embroidery that has ever been written, but I see more of this problem when I try to run the auto ActiFeed. I have been able to work around this issue on knits by setting my lower thread feed limit to 3 or 4. This feeds more thread, but doesn't seem to pull as tight. I currently have more problems with lightweight wovens. I have talked to Robert at Melco, and still cannot resolve this problem. He recommended adding more underlay, but this did not help. I am sewing Block letters, ~1.5" tall, center walk and edge walk underlay at 30 pts., and I get puckering at the tips of the columns no matter what I do. Hope someone can advise. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================