[amayausers.com] Re: Presser Foot

This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA 
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: 
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/529.html#000001

I see no one answered about changing the presser foot, but this is a related 
question instead of adding a new 'topic'...
is it possible for the presser foot to 'slide' up?
I've noticed that we aren't moving the wheel at all like we had to for thick 
stuff-and today I'm running sweatshirts with mesh and 2 oz. backing...and at 
'zero' wheel clicks-the presser foot doesn't even compress the sweatshirt.
If someone can answer about installation of a new foot for Tina, it might 
answer my question about how 'low' the presser foot should be compared to the 
end of the needles. I'd guess mine is between 3/8" and 5/16" from the needle 
tip...

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts: