[amayausers] Re: Power Outage
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 18 Oct 2006 15:56:49 -0700
I had the power go out a few days ago and when it came back my machines
powered on and I simply hit the start button and it continued on right where
it started.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Kushnerick" <bkushner@xxxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, October 18, 2006 3:52 PM
Subject: [amayausers] Re: Power Outage
> David
>
> You obviously know the Amaya much better than I do but when I was
> considering the Amaya, I did ask a dealer rep what the procedure was to
> restart stitching after a power outage stop and I too was under the
> impression that once power was restored, it was simply a matter of
> telling the Amaya to "start stitching" and the machine would carry on
> from where it stopped ..... similar to what most other new machine
> manufacturers / models offer [except with the Amaya, it is done through
> the software rather hitting a button on the machine].
>
> Did I misunderstand the dealer or is there perhaps some other "quick"
> restart stitching procedure ?
>
> Thanks
>
> Bob
>
> .
>
>
> David Anderson - Keband A'Asia wrote:
>
>>Hi Barbara,
>>
>>The easiest way to get back to sewing following a power outage is to use
>>the "Move To Last Origin" function.
>>
>>1. Restart AMAYA OS and the AMAYA machine(s).
>>
>>2. Load the design and center the hoop.
>>
>>3. Click on the Tools menu and then click on Move To Last Origin. The
>>machine will move to the last starting position.
>>
>>4. Frame forward or use the Move to Stitch functions to move forward in
>>the design to the desired starting stitch.
>>
>>Trust this helps.
>>
>>David Anderson
>>
>>Keband Australasia Pty. Ltd.
>>18 Daphne Cres,
>>Hurstbridge. Vic. 3099
>>Australia
>>Email: info@xxxxxxxxxx
>>
>>
>>
>>-----Original Message-----
>>From: amayausers-bounce@xxxxxxxxxxxxx
>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Lee & Barbara Ott
>>Sent: Wednesday, 18 October 2006 9:55 AM
>>To: amayausers@xxxxxxxxxxxxx
>>Subject: [amayausers] Power Outage
>>
>>
>>I was told that if you turn off the machine and you hadn't finished a
>>design,it would go back to the same place when you turned it back on.
>>Well,
>>I just had a power outage. I had to turn off the machines and restart.
>>Theywanted to start at the beginning. With the new upgrades in the
>>software,has this feature been left out / compromised?
>>
>>Barbara Ott
>>
>>
>>
>>
>>Digital Stitchz
>>
>>905 Texas Street
>>
>>Fairfield, CA 94533
>>
>>(707) 426-9963 Phone
>>
>>(707) 426-9983 FAX
>>
>>Embroidery, Applique, Vinyl Lettering &numbers, Screenprinting &Laser
>>Engraving----- Fight back spam! Download the Blue Frog.
>>http://www.bluesecurity.com/register/s?user=ZGlnaXRhbHN0aXRjaHo4Njc5
>>===========================================================
>>
>>The AmayaUsers Mailing List
>>Website: http://www.amayausers.com
>>Discussion Board: http://www.amayausers.com/boards
>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>>===========================================================
>>
>>===========================================================
>>
>>The AmayaUsers Mailing List
>>Website: http://www.amayausers.com
>>Discussion Board: http://www.amayausers.com/boards
>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>>===========================================================
>>
>>
>>
>>
>
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
