[amayausers] Re: Pocket topper hooping

I would use a piece of Scotch Tape and mark the line where the pocket meets the 
shirt
then hoop it and fold back the pocket and secure it with tape make sure the 
laser
tracks and goes below your first tape mark and you should be OK.
Then you can remove the tape before sewing.

Good Luck

Ron Vinyard
Body Cover / Magic Stitches
www.bodycoverdesign.com

Grants Pass, Oregon
1-888-435-0716
  ----- Original Message ----- 
  From: AthenaAccents@xxxxxxx 
  To: amayausers@xxxxxxxxxxxxx 
  Sent: Thursday, September 22, 2005 3:52 PM
  Subject: [amayausers] Pocket topper hooping


  Hi all- Our little shop has received its first pocket topper design.  My 
partner who does all the hooping (I'm spatially challenged) is having a tough 
time getting it hooped so that the design falls just in the right spot.  It 
starts about 2 inches above the pocket.  Any suggestions?  Thanks!

  Kim and Bessie
  Athena Embroidery Accents
  Philadelphia, PA

Other related posts: