[amayausers.com] Re: Old thread
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 23 Jan 2010 04:15:52 UT
This message was posted by Donald on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/855.html
I was wondering if thread can be old and bad. I started a design for a hat
today, all the colors sewed out fine except the black color. Numerous thread
breaks. At first I thought it might be the seem in the center of the 6 panel
hat. I did change the needle to a 80/12 bp but the problem of thread breaks
still occured in spots away from the seem. I finally made it thru the black
color to the next color, this color sewed out without a thread break even
across the seem. The thread I was using is arc thread. tomarrow I will try a
new unopen spool but it is still arc thread. I had sewn out the design on a
flat and it sewed without a thread break even the black. I did make the design
a little smaller just remembered the stitches might be to small in the black
will check that in the morning also. Any help would be apprieated.
Donald
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
